Showing posts with label office. Show all posts
Showing posts with label office. Show all posts

Monday, August 18, 2014

Things are looking up!

Yesterday we went to home depot to pick up some stuff for the bathroom sink, and since he couldn't find what he needed there to install the sink, M. moved on to his next project, overhead lighting.  After a few sexist comments from the salesperson about how pregnant ladies have the easy job of lying on the couch and snuggling the baby, we picked up all of the stuff we needed, came home, moved a freezer into the basement (take that, salesguy) and I turned 12 lbs of tomatoes into sauce while M. disappeared upstairs.  I eventually went to bed, and this morning, I woke up to overhead lighting in the office.
We opted for four inch LED halo fixtures.  This is the part where I should tell you all about what we installed, how we installed it, etc. but this is my blog and I didn't do any of the actual work. So, marry a person who can install overhead lighting and then go to bed. That is how you do this.  The only two parts I "helped" with (besides finding the correct little pieces in the tiny piece aisle at Home Depot) were picking out the 4 inch halo fixtures (which are listed for accent or task lighting, but the ceiling in this room is pretty low, and the room is pretty tiny) and offering my opinion on which tiles should get the lights inserted in them. 
The reason it was a question of tiles is because the housings needed to have three inches of clearance between them and the insulation, and as you get further back in the room, the insulation is closer and closer to the tiles.  Even though the housings were not LED specific, so that recommendation was probably excessive for LEDs.  But fire safety is important, so all of the housings went towards the front of the room where they had 3". The desk might still require a task light but we have a few of those to spare. 
If anyone needs specific instructions, leave a comment and I'll have M. get back to you. But it's so exciting to have the switch function in this room (it didn't even switch an outlet before) and I'm really psyched to get my sewing on because it will be so much easier! 

Tuesday, July 22, 2014

Elfa Office


As a housewarming present, my sister gave us a gift card for Elfa shelving from the Container Store.  We were originally planning on using it to reconfigure one of the closets, but with the baby coming, we are losing our guest room and so we wanted to rearrange our office so the setup is slightly less awkward for guests.  We also needed better storage options than the current way the desk in there is set up.  We went to the Container Store website and picked this option to purchase as a kit.  It was college night on Sunday night, so we headed to the store knowing they wouldn't pull custom Elfa at the event, but I had called earlier to ask if they had the kit in stock and was told they had everything in stock. Then we got there, they told us that a kit doesn't technically exist, but we sadfaced them about driving all the way from Baltimore to Rockville and they very very kindly agreed to pull it for us.  We did make a modification which resulted in losing a shelf, but the office is so short another shelf would have been too crowded.  We also can reconfigure our existing Elfa a bit now as well and might get more room that way. 
This is the new desk setup, currently still over our futon, which will be moving to the other end of the room once we have gotten the desk out of the way. 




This set of Elfa will be moving into the baby's room, most likely with only the basket shelf (which has a closet rod attachment that we can use to hang fancy baby clothes, since the room has no closet), and two of the white shelves.  The third white shelf will move to Mark's desk above the monitor. 



This Elfa will probably stay the way it is, except that middle rod, which is part of their "back of door" solutions will be moving most likely to the baby's room or to the bathroom, depending on where we decide we need more storage.  This is my original set of Elfa, which I've had since college.  We have had it in four apartments, plus the house, and it has held up great.  It's about 8 years old and has been extremely versatile.  My hope is to get the craft area a bit better organized, maybe this weekend, and get all of the stuff moved over so we can get the desk out. Apparently Salvation Army will come pick up furniture, so that may be our best option for getting both the desk and the bookcase out. 

Monday, September 23, 2013

Craft Space

I'm a big crafter, so 5-6 large boxes of craft stuff have been camping out in our guest room while we try to decide how to arrange the office/craft room.  We finally made some progress. 
 
First, we hung the pegboard.
Technically, first we painted it - it was a lovely blue that looked terrible against the wall, so we painted it the same gray that is in the kitchen.  Pegboard is really easy to paint.
Now that I have the pegboard, I've been able to get a bunch of my scissors, stamps, thread, and other items up and out of the way. 
 
We also finally hung the elfa shelving.  We have two sets, one on either side of the door.  The other side is for office supplies and the router and stuff. 
 
Over the weekend, I finally got around to rearranging the shelves, which had become a dumping ground.
The printer is wireless, so it's going to live downstairs.  And so I finally got my fabric into new bins and up on the shelves.  The bins are sterilite bins from Target and I bought 2 enormous ones and a set of 5 small shoeboxes.  I searched for craft room inspiration and fabric storage ideas, and somebody recommended keeping fat quarters/quilting scraps in shoeboxes, which I thought was a great idea. It lets me sort by project or color.  I have a sixth shoe box that I bought for keeping all the birthday cards, etc. that people send me that are really sweet or sentimental and I don't want to get rid of.  (It was a stor-all bankers box before we moved, so good job downsizing, self!)
 
At the moment, the plan is to keep my serger on the bottom shelf, but I'm not sure how well that will go. There is still at least one giant box to unpack of crafting miscellany.  I decided last night to take a good sort through my beads and then maybe sell/freecycle them because I don't like what I have, I don't enjoy beading as a hobby, and they take up a lot of room.